Masonry/Flush Frames "M" Type

Masonry / Flush Frames
    CURRIES offers a complete line of flush frames that are available in 18, 16, 14, and 12 gauge cold-rolled or galvanealed steel and in 16 or 14 gauge stainless steel. Frames can be knocked down, set up and spot welded at miters, or set up and arc welded at miters and ground smooth. The 12 gauge frames are saw miter welded or saw butt end welded, corner construction only. They are available for either 1-3/8" (35) or 1-3/4" (44) thick doors. CURRIES frames are manufactured for all wall conditions such as masonry, steel stud, wood stud, and poured concrete.

Narrow Face Frames
    CURRIES offers pre-engineered, knock-down (KD) flush frames with face dimensions of 1" (25), 1-1/4" (32), 1-1/2" (38), 1-3/4" (44), or 2" (51).

Frame Sizes
    Frame sizes are available to match door sizes, in any combination of singles or pairs. Non-Standard width or height frames are available on special order.

Specifications
    Frames shall be as manufactured by CURRIES, Mason City, Iowa. Frames are to be fabricated of either cold-rolled steel or galvannealed steel (as specified) of either 18, 16, 14, or 12 gauge. All joints are to be die-mitered with integral tabs for reinforcment and interlocking of the jambs to the head. All 12 gauge frames are saw miter or saw butt end corner construction. Frames shall be knock-down or set up and welded. Frames shall be thoroughly degreased and cleaned of all imperfections before painting. All frames shall receive a factory baked-on coat of rust inhibitive primer. Frames shall be mortised, reinforced, and drilled and tapped for all mortise finish hardware. Frames are to be reinforced only for surface mounted hardware, with drilling and tapping to be done in the field by others. Metal plaster guards are to be provided for all mortised cutouts. Minimum requirements for hardware reinforcements are to be as follows: hinge reinforcing-7 gauge x 1-5/8" (41) x 10" (254), lock strike reinforcing-14 gauge conforming to template requirements, closer reinforcing-12 gauge.

"M" Type Frame Profiles
The Frame profiles are all large images that may take some time to load into your browser.

ASSA ABLOY